How to Clean a Jetted Tub? DIY Cleaning Tips

No matter how awesome water therapy is for your health, a jetted tub is only as relaxing as it is clean. To really enjoy your whirlpool bath, you’ll need to roll up your sleeves now and then. Cleaning a jetted tub doesn’t take hours of grueling work, but it’s not a quick job either.

With all its nooks, crannies, and hard-to-reach spots, it’s more work than cleaning a bathtub. But the effort is worth it for the spa-like relaxation it offers. In this quick guide, we’ll show you how to clean a jetted tub so that you can enjoy a truly relaxing bath.

 

How to Clean a Jetted Tub?

Follow the below steps to learn how to clean a jet tub and prevent mold or bacteria from growing in your tub's water lines.

1. Add one Fomin dishwasher detergent cleaner tablet to your tub filled with warm or cold water.
2. Pour in about 1/2 gallon of white vinegar.
3. Ensure the water level covers the jets completely.
4. Turn on the jets and let them run for 10-15 minutes.
5. Use a long-handled scrubber to scrub the tub ring.
6. Drain the water and sprinkle baking soda around the tub.
7. Let it sit for about 10 minutes, and then give it a quick scrub. (Doing this every week or two makes it easier.)
8. Use a pitcher, large cup, small bucket, or shower spray to rinse off the cleaner.
9. Spray the jets, drain, and overflow valve with bleach or a bleach-free disinfectant.
10. Let it sit for a few minutes.
11. Scrub these areas with an old toothbrush.
12. Rinse the tub thoroughly one more time.
13. Use an all-purpose Fomin cleaner to wipe around the trim and fixtures.

 

How To Clean A Jetted Whirlpool Tub?

 

Cleaning a jetted whirlpool tub might seem like a big task, but it’s pretty easy if you know the steps. Here's a simple guide to help you keep your tub sparkling clean:

Gather Your Supplies

• Non-abrasive cleaner
• Dish soap
• White vinegar
• Baking soda
• Soft cloths or sponges
• Old toothbrush
• Bucket

 

Step-by-Step Cleaning

Fill the Tub: Fill your whirlpool tub with warm water until a couple of inches covers the jets. Hot water helps to loosen up any grime and gunk.
Add Cleaning Solution: Pour in two cups of white vinegar and some dish soap. The vinegar helps to break down buildup, while the dish soap cleans and deodorizes.
Run the Jets: Turn on the jets and let them run for about 15 minutes. This will circulate the cleaning solution through the pipes and jets, removing hidden grime.
Drain and Refill: Drain the tub and run the jets again for another 10 minutes to rinse any remaining cleaner.
Scrub the Surfaces: Drain the tub again and sprinkle baking soda on any stubborn spots. Use a sponge to scrub the tub surfaces gently. For hard-to-reach areas, like around the jets, use an old toothbrush.
Rinse and Dry: Rinse the tub thoroughly with clean water to wash away any leftover cleaner and debris.

 

How to Clean the Jets of a Jacuzzi Tub?

 

Keeping the jets of your Jacuzzi tub clean ensures a relaxing and hygienic soak every time. Follow these steps to keep your tub in top shape:

1. Fill the Jacuzzi tub with warm water until the jets are covered by about 2 inches.
2. Pour a few squirts of dish soap or two cups of white vinegar into the water.
3. For an extra boost, add half a cup of baking soda.
4. Turn on the jets and let them run for 15 minutes. This helps to loosen and remove any build-up inside the pipes and jets.
5. Drain the tub completely.
6. Refill it with cold water and run the jets for another 10 minutes to rinse out the remaining cleaning agents.
7. Use an old toothbrush to scrub around each jet, focusing on any spots with visible grime.
8. Wipe down the tub and jets with a clean cloth.
9. Drain the tub again and give it a final rinse with clean water to ensure everything is spotless.

 

Final Words

Maintaining a pristine jetted tub is essential to fully enjoying its relaxing benefits. Although it requires more effort than cleaning a bathtub, the process isn't overly complicated if you follow the right steps. With our guide on how to clean a jetted tub, you can effortlessly keep your whirlpool bath in top condition, allowing you to unwind in a hygienic and serene environment.

 

Building a Plastic-Free Future: Fomin's Commitment to Driving Sustainability

 

In an era where plastic pollution has become an alarming global issue, it is crucial to seek innovative solutions to reduce its devastating impact on our oceans and ecosystems. Annually, an astounding 8 million metric tons of plastic waste goes into our oceans, endangering marine life and the sensitive equilibrium of biodiversity on Earth. Fomin, a pioneer in sustainable initiatives, has driven the movement toward a plastic-free planet.

 

 

By purchasing Fomin's eco-friendly cleaning products like dishwasher detergent tablet etc., you actively participate in the battle against plastic pollution. Join our loyalty program to participate in building a sustainable future - one where plastic is not a threat but a relic of the past.

 

FAQ

How To Clean Jets On A Whirlpool Tub?

To clean jets on a whirlpool tub, fill your tub with warm water, add two cups of vinegar, and run the jets for 15 minutes. Drain, refill with cold water, and rerun the jets to rinse.